Wednesday, April 8, 2009

Digital Wireless Standards (Cordless)

Japan (PHS)
Personal Handyphone System is the Japanese version of the U.S.’s PCS (Personal Communications Services) with two key differences. It’s not as powerful as PCS. You can’t use a PHS phone in a rapidly moving vehicle, since there is no cell-handoff (i.e. it won’t move you from one cell to another) and thus, if you move outside your cell with PHS, you lose connection. PHS is a perfect mobile phone for pedestrians in high density cities like Tokyo, as long as they don’t move around a lot during the course of a call.

US (PACS)
Personal Communications Access System is a cellular system providing limited, regional mobility in a given area. It provides mobility between that of a cordless phone and a full-fledged cellular system. Originally developed by Bell Labs in the early 1980’s, PACS is a comprehensive framework for the deployment of PCS and applies to both licensed and unlicensed applications. Now it is approved by the TIA and Exchange Carriers Standards Associations. Today’s currently implemented versions of PCS are “up-banded” versions of the 900 MHz AMPS and GSM cellular standards.

Europe (DECT)
Digital European Cordless Telecommunication is the pan-European wireless standard based on Time Division Multiple Access (TDMA) used for limited-range wireless services. Based on advanced TDMA technology, and used primarily for wireless PBX systems, telepoint and residential cordless telephony today, used for DECT include paging and cordless LANs. DECT frequency is 1800-1900 MHz. Stop press (the old meaning for DECT) was “Digital European Cordless Telephone” but since the DECT standard also has spread to China and South America, the correct definition is now “Digital Enhanced Cordless Telephones”

Tuesday, April 7, 2009

Differential Phase Shift Keying (DPSK):

Also called dibit phase shift keying, it is a modulation technique used to improve the efficiency with which the naturally analog electromagnetic waveform is employed to carry digital bits in a digital bitstream. DPSK is a form of “coherent demodulation,” in which the phase of the incoming signal is compared to a replica of the carrier waveform. The carrier waveform (the carrier frequency “carries” the data, and the waveform is characteristic of all electromagnetic energy), is used as a reference point. With DPSK, the carrier waveform reference point serves to record changes in the binary data code. In other words, a “1” in the PSK (Phase Shift Keying) signal is denoted by no change in the DPSK signal, and a “0” is denoted by a change in the DPSK signal.

DPSK works much better than PSK because so many things can foul up the “absolute” value of a signal sent over an Unshielded Twist Pair (UTP) cable pair or over a microwave radio channel. ElectroMagnetic Interference (EMI) of all sorts can cause the “absolute value” of an originating signal to be “questionable” on the receiving end. Assuming some reasonable level of consistency in the impact of such factors from transmitter to receiver, it helps a lot to have a reference point. DPSK does that.

Takeaway: Differential Phase Shift Keying has emerged as the type of phase modulation most likely to reach commercial deployment since Phase Shift Keying (PSK) is not considered practical due to its extremely difficult method of reception required. Today, air-traffic-control radio communications employ the use of DPSK modulation due to its clear performance advantage over alternative modulation schemes and the availability of rather inexpensive DPSK demodulators (to remove the carrier signal so that the data can be interpreted).

Thursday, April 2, 2009

Frequency Modulation (FM)

Frequency Modulation (FM): A modulation technique in which the carrier frequency is shifted by an amount proportional to the value of the modulating signal. The amplitude of the carrier signals remains constant. The deviation of the carrier frequency determines the signal content of the message. Commercial TV and FM radio use this technique, which is much less sensitive to noise and interference than is amplitude modulation (AM). In the world of modems, digital bit streams can be transmitted over analog facilities through this same technique, whereby a 0 bit might be represented by a high-frequency sine wave (or set of sine waves) and a 1 bit by a low-frequency sine wave (or set of sine waves).


In the image below, notice the top line represents the audio signal being transmitted.

The red line represents Amplitude Modulation with the frequency (space between waves) remaining constant with each modulation of the signal. The deviation of the amplitude determines the message.

The blue line represents Frequency Modulation with the amplitude (height of the waves) remaining constant with each modulation of the signal. The deviation of the frequency determines the message.



Image Source: http://en.wikipedia.org/wiki/Amplitude_modulation

Monday, March 30, 2009

Amplitude Modulation

Also known as “AM”, it is a method of adding information to an electronic signal in which the signal is varied by its height to impose information on it. The information being carried causes the amplitude (height of the sine wave) to vary. In the case of LANs, the change in the signal is registered by the receiving device as a 1 or a 0. A combination of these conveys different information, such as letters, numbers, punctuation marks, or control characters. In the world of modems, digital bit stream can be transmitted over an analog network by amplitude modulation, with the carrier frequency being modulated to reflect a 1 bit by a high amplitude sine wave (or series of sine waves) and a 0 bit with a low amplitude sine wave or (series of sine waves). The principal forms of Amplitude Modulation are:

· QDM: Double-band Amplitude Modulation
· QAM: Quadrature Amplitude Modulation
· SSB: Single-sideband Modulation
· VSB: Vestigal Sideband Modulation

Thursday, March 19, 2009

Modulation

Now that we’ve seen a few of the multiplexing technologies which help divide wireless spectrum, let’s take a deeper look at how the spectrum is put to use via modulation techniques (overlaying voice for communication).

*Note: CDMA, TDMA, etc are typically looked upon as “channel access methods” but actually employ modulation techniques to transmit data (e.g. a CDMA signal being put onto a carrier)

Modulation: The process of varying some characteristic of the electrical carrier wave as the information to be transmitted on that carrier waves varies. In the wireless world, we first take a signal, such as a telephone conversation, and impress it upon a constant radio wave called a carrier. Once this is done, the voice signal varies (or modulates) this radio wave. The two (voice signal and carrier wave) go together over the air. A voice frequency in the audible range (which we can hear) thus modulates or varies a constant frequency in the radio range (which we cannot hear). Essentially, modulation makes voice band and radio band frequencies work together. Three types of modulation are commonly used for communications:

- Amplitude Modulation
- Frequency Modulation
- Phase Modulation
-
And there are variations on these themes called Phase Shift Keying (PSK) and Quadrature Amplitude Modulation (QAM). In the next few days, we will cover all of these types of modulation and their associated themes.

Wednesday, March 18, 2009

Frequency Division Multiple Access (FDMA): One of several technologies used to separate multiple transmissions over a finite frequency allocation. FDMA refers to the method of allocating a discrete amount of frequency bandwidth to each user to permit many simultaneous conversations. In cellular telephony, for example, each caller occupies approximately 25kHz of frequency spectrum. The cellular telephony frequency band, allocated from 824 MHz to 840 MHz and 869 MHz, consists of 416 total channels, or frequency slots, available for conversations. Within each cell, approximately 48 channels are available for mobile users. Different channels are allocated for neighboring cell sites, allowing for re-use of frequencies with a minimum of interference. This technique of assigning individual frequency slots, and re-using these frequency slots throughout the system, is known as FDMA.


The below picture depicts a visual comparison of how FDMA, TDMA, and CDMA allocate bandwidth.

*Note how FDMA follows the “Frequency” axis, TDMA the “Time” axis, and CDMA the “Code” axis.



Source: http://www.ce-mag.com/archive/2000/sepoct/0009c30a.jpg

Tuesday, March 17, 2009

Time Division Multiple Access (TDMA)

Now that we’ve seen how CDMA uses what can be referred to as a “spread spectrum” technology to allow users to share a bandwidth of frequencies, we will begin to explore other multiplexing concepts. Today’s term divides bandwidth access by time rather than a special coding scheme (CDMA).

Time Division Multiple Access (TDMA): A technique for transmitting a number of separate data, voice and/or video signals one after another. With Time Division multiplexing, you “sample” each voice conversation, interleave the samples, send them on their way, then reconstruct the several conversations at the other end. There are several ways to do the sampling. You can sample eight bits (one byte) of each conversation, or you can sample one bit. The former is called “word interleaving”; the latter “bit interleaving”. The basic goal of multiplexing – whether it be time division or any other form – is to save money, to cram more conversations (voice, data, video or facsimile) onto fewer phone lines. Basically, to substitute electronics for copper.




Picture Source: http://en.wikipedia.org/wiki/File:Tdma-frame-structure.png